TRAIL A MATE HYDRAULIC JACK - MK2 1500kg BLUE
$549.00
Your shopping bag is empty
Go to the shopPlease note that our hours of operation this weekend are closing Thursday 5:00 PM and reopens on Monday at 8:30 AM.
TRAIL A MATE HYDRAULIC JACK - MK2 1500kg BLUE
THIS PRODUCT NEEDS NO INTRODUCTION. SIMPLY THE EASIEST, MOST RELIABLE AND MOST OF ALL SAFEST WAY TO JACK UP YOUR CARAVAN, CAMPER, HORSE FLOAT OR TRAILER.
Trail-A-Mate hydraulic Jack, specifically designed for caravans, trailers and horse floats. No need to have another jack with a safe working load of 1500kgs.
Includes:
1 X Base plate
1 X Lifting clamp
2 X Jacking bracket
1 X Jacking handle
Requires 60mm clamp to be purchased separately if used on the A-Frame.
Does NOT fit standard 50mm clamp (Required 60mm clamp part number 450-00089 - SOLD SEPARATELY)
Easy to Use - Being hydraulic it takes very little effort to operate
Safety - Fully complies with the Australian mandatory safety standards (2693:2007)
Does NOT fit standard 50mm clamp (Required 60mm clamp part number 450-00089 - SOLD SEPARATELY)
Easy to Use - Being hydraulic it takes very little effort to operate
Safety - Fully complies with the Australian mandatory safety standards (2693:2007)
1 year warranty.
Specifications
Model: Model: 040981 CAMEC, 450-00085 Coast to Coast
Brand: Trail-A-Mate
1500kg safe working load / 3500kg ATM
Suit standard height and off-road models
4 positions for the clamp on the 500mm outer shaft - plus the lift height of 380mm
Suits 60mm clamps only
Instructions
Instructions for safe use for caravan/trailer jacks:
The jack should be used on level firm ground wherever possible.
It is recommended that the wheels of the caravan/trailer be chocked.
No person should remain in a caravan/trailer supported by a jack.
No person should place any portion of his or her body under a caravan/trailer supported by a jack.
The caravan/trailer should be attached to the towing vehicle.
It has 4 positions for you to clamp to on the mast. With the wheel on, from the bottom of the wheel to the first notch is 280mm, then 370mm, 460mm, to 550mm on the top notch. It can then be jacked up an additional 380mm between the bottom notch and the bottom of the wheel.
ALSO AVAILABLE IN THE MARK 1 - (RED) FOR LIGHTER VEHICLES - LIFTS 1000KG SEE OUR OTHER ITEMS.
RELATED PRODUCTS
